If you’re preparing a surface for painting, you’ve likely had both pressure washing and sandblasting presented to you as excellent options. Both pressure washing and sandblasting ensure that surfaces are ready for paint, but they do so in different ways. Depending on your situation, one may be more preferable to you over the other.
Here is what you need to know about the difference between pressure washing and sandblasting so that you can better determine which is right for you.
What Is Pressure Washing?
Pressure washing, sometimes called power washing, is the use of highly pressurized waters and a cleaning solution in order to deep-clean surfaces. Some professionals use chemical cleaning solutions while others prefer to use eco-friendly options, like the team here at True Clean Power Wash & Seal.
Pressure washing cleans away hard-to-remove residue for a fresh, renewed surface. Since it uses water, there’s no need to worry about dust clouds. While you can DIY pressure washing, it’s better to leave it to the professionals. This is because due to how pressurized the water is, unless you have extensive training and experience, you could accidentally damage your home instead of cleaning it.
What Is Sandblasting?
Sandblasting is also known as abrasive blasting. Like pressure washing, sandblasting involves the use of highly pressurized materials in order to clean surfaces. Unlike pressure washing, though, sandblasting uses abrasive materials, like sand or glass.
There is both dry sandblasting and wet sandblasting. People typically opt for wet sandblasting when they want to avoid the dust that can result from dry sandblasting. As the names suggest, dry sandblasting uses air and abrasive materials while wet sandblasting uses water and abrasive materials.
Both pressure washing and sandblasting need to be done by professionals. Sandblasting can also damage your home if done incorrectly, as well as present a fire risk. Professionals know how to sandblast while being mindful of dangers.
What Is Pressure Washing Best For?
Both pressure washing and sandblasting are good services to have done, it just depends on your needs. Pressure washing is best for cleaning. You can pressure wash many different exterior surfaces, from driveways to roofs and more. Professionals know how to adjust the pressure settings to best suit the material being cleaned.
People have their properties pressure washed in order to clean them. They can also have their properties pressure washed to prep it for a new paint job, by ensuring that they have a nice, clean surface to work with.
What Is Sandblasting Best For?
Both pressure washing and sandblasting can clean your home and prepare it for a new coat of paint. However, if you want to remove old paint or you have residue stuck on your surfaces, you’d likely be better off with sandblasting.
This is because while pressure washing has the pressure needed to do a deep clean, sandblasting has the abrasiveness needed to remove old finishes and the like. Sandblasting is best for surface preparation.
Which Is Better: Pressure Washing Or Sandblasting?
When it comes to two different services, people always want to know which one is better. In many cases, as with pressure washing and sandblasting, it isn’t a question of one being superior to the other. It’s a matter of what you’re doing. Depending on the project, one service may be better suited to your needs than the other.
As mentioned above, pressure washing is best for cleaning purposes. You can pressure wash concrete, your house, and more. It’s important to leave this job to the professionals, tempting as it may be to try to DIY it. DIY pressure washing can lead to many issues, including injury and sickness.
On the other hand, sandblasting is best for removing old finishes. Depending on the pressure used, you can clean with sandblasting, the same as you can with pressure washing. You can also do very powerful settings in order to prepare a surface in mere hours.
So, if you just need to clean your home, pressure washing is probably better for you. However, if you want to remove old finishes, you would likely be better off with sandblasting.
As you can see, both pressure washing and sandblasting are helpful services to clean your home. They’re also both best left to professional hands, for safety reasons and to prevent property damage.
Do You Need Professional Pressure Washing Services?
True Clean Power Wash & Seal provides professional pressure washing services around the Charlotte, NC area. We can help you give your home a refresh to enhance its curb appeal, ensure that your business is a healthier, safer environment, and prepare your surfaces for painting. Contact us today to learn more about our pressure washing services and how we can help you.